Polycom SoundPoint IP Phone Provisioning Guide
How to configure your Polycom IP Phone for use on the Telair network
Section titled “How to configure your Polycom IP Phone for use on the Telair network”Skip to step 4 if your phone has not been provisioned before.
Section titled “Skip to step 4 if your phone has not been provisioned before.”Step 1:
- Select Menu
- Advanced
- enter password: 456
- Admin Settings
- Reset to Defaults
- Reset Device Settings
Step 2 – _Do the following once the above is complete:****_
- Select Menu
- Advanced
- enter password: 456
- Admin Settings
- Reset to Defaults
- Reset Local Configuration
_Step 3 –** Enter in provisioning rule:_**
- Select Menu
- Advanced
- enter password: 456
- Admin Settings
- Network Configuration
- Server Menu.
***Please make sure the following the parameters are set:****
Server Type: HTTP
Server Address: <ask support for details>
7. Save Settings and Reboot phone.
Your phone is now registered and will come online